If you want to install PVC shutters properly, you must know how to install them. This article will guide you through the easiest and most convenient installation steps :1. First, find a suitable place in the house to put PVC shutters; 2. Then, open the doors and Windows to let in air; 3. Next, pull the window down (note: don’t pull it up) to prevent dust from entering the room; 4. Finally, use a rag to clean up any debris.
1: The principle of PVC louvers
PVC blinds are made by slicing fabric and attaching a layer of molecular resin to the surface. The film contains a lot of air and water vapor, and these gases and water can absorb light and increase the temperature of the room, thus creating a convective airflow to improve ventilation. This plays the role of heat preservation and heat insulation. Therefore, PVC plantation shutters are a product that can adjust the room temperature by changing the wind pressure. Installation method and steps: The installation method is relatively simple, just fix the film layer to the bottom of the window. Then use screws to adjust the horizontal or vertical position of the Windows and doors until the blades cover the entire window. Finally, remove the thin film strip at the top and put it into the glass frame, and tape it securely. How to choose the right materials for production? If you want to make your own, you can find professional manufacturers to buy raw materials for processing; If you want to purchase materials from outside, you should first understand the characteristics of the materials you need, and then choose the appropriate materials according to the demand.
2: Installation methods and procedures
Installation method and steps: 1. First, determine the size and shape of PVC louvers, which is the most critical step. 2. Then place the water basin on the windowsill and adjust the position of the window so that it is in a horizontal state; 3, the next thing to do is to clean up the dust in the screw hole, so as to better fix the wire; 4, finally, we need to check whether there is a gap between the glass, if not, we should use glass glue or adhesive to fill the gap. FAQ :1. What are the steps in the installation process? Answer: It mainly includes three steps, one is to confirm the window frame, the second is to confirm the window line, the third is to install the door and window fittings.
3: How to choose the right materials for production?
There are two main ways to install PVC shutters: one is welded, and the other is made of glass or metal. Weld-on installation requires the door frame and panels to be connected to the doors and Windows, and then integrated installation. This method is usually simple, but pay attention to temperature control. For high temperature areas, cold bridge method can be used to produce; And in the area of low temperature, can use fusion welding method to manufacture. Choosing the right materials is also important. If the use of easy deformation, fragile materials, may lead to insufficient strength or even fracture, resulting in safety accidents; In addition, consider the material’s water absorption and corrosion resistance.