5 thoughts on “Alumina for lifestyle use”

  1. Alumina can also be used as analytical reagents, dehydration of organic solvents, adsorption agents, organic response catalysts, abrasives, polishing agents, raw materials for smelting aluminum, and refractory materials. In addition, alumina can also be used as hyperfluoro -drinking fluoride, used as an oxygen -making industry, textile industry, and gas drying in the electronics industry.
    The alumina contains element aluminum and oxygen. If the aluminum aluminum raw material is chemically treated, the product made from the oxides such as silicon, iron, titanium, etc. is a very high purity alumina raw material. The AL2O3 content is generally above 99%.
    M ore phase consists of 40%to 76%γ-Al2O3 and 24%to 60%α-Al2O3. γ-Al2O3 can be transformed into α-Al2O3 at 950-1200 ℃, and significant volume contraction occurs at the same time.

  2. Aluminum hydroxide is the maximum dosage and the most widely used inorganic flame retardant additive. Aluminum hydroxide can not only be flame retardant, but also prevent smoking, no drops, and no toxic gases. Therefore, it has obtained a widespread application, and the amount of usage is also increasing year by year. Scope of use: thermosetry plastic, thermoplastic plastic, synthetic rubber, coatings and building materials industries. Aluminum hydroxide aluminum hydroxide is divided into two types: industrial and pharmaceutical. I. Industrial Grade Introduction: Molecular formula: AL (OH) 3 or Al2O3 • 3H2O molecular weight: 78 1. Chemical composition of technical indicators for chemical ingredients% Al2O3 is not less than less than the impurities. AH-2 64.0 35 0.04 0.03 0.5 AH-3 63.5 35 0.08 0.05 0.6 Note: 1. Al2O3 content is 100%minus the substantial content of burning and the impurities listed in the table. 2. The chemical ingredients in the table are calculated based on the dry base of drying 2h at 110 ± 5 ℃. 3. The impurities in the table are processed in accordance with the GB8170 digital contract. Physical characteristics: There are four specifications: 325 mesh, 800 mesh, 1250 mesh, and 5000 mesh. 2. The use of aluminum hydroxide is the maximum dosage and the most widely used inorganic flame retardant additive. Aluminum hydroxide can not only be flame retardant, but also prevent smoking, no drops, and no toxic gases. Therefore, it has obtained a widespread application, and the amount of usage is also increasing year by year. Scope of use: thermosetry plastic, thermoplastic plastic, synthetic rubber, coatings and building materials industries. 3. Packaging, transportation, storage packaging: Internal plastic and outer coating film bag, each bag is 25kg or 40kg. Transportation: This product is non -dangerous goods. During the transportation, it prevents moisture, rain and packaging damage. Storage: Store in a dry and ventilated warehouse. 2. Introduction to Medicine -grade aluminum hydroxide: Aluminum hydroxide dry gel English name Aluminium Hydroxide Dried Gel Aluminum Aluminum Gel Molecular AL (OH) 3 molecular weight is used for gastrointestinal suppression of gastric acid, commonly used as compound prescription Preparations such as Udrus and aluminum capsules and aluminum hydroxide pieces can also be used for medicinal auxiliary materials. Properties: white powder, odorless and tasteless. Insperfolid in water and ethanol, soluble in thin inorganic acids such as hydrochloric acid. Main control indicators: acid power: not less than 230ml/g, content: not less than 48.0 % according to aluminum dioxide (according to aluminum hydroxide, not less than 76.5 %). Product Quality Execution Standard: Chinese Pharmacopoeia CP2005 version/American Pharmacopoeia USP28. Double -layer polyethylene plastic bags are used in the packaging and transportation inner bag, and the external single -layer polyethylene plastic woven bags or paper plastic composite bags, cardboard barrel packaging; each bag of net weight is 20kg. Dry warehouses should be stored. The packaging should be completely sealed to prevent moisture. Do not store mixing with acid products. Drinking volume: 2.8 cubic meters/ton. The fine amount of fine powder for this product (about 0.5g of hydroxide), 10ml of dilute hydrochloric acid, after heating and dissolving, filtering, and the identification reaction of aluminum salt (Appendix Ⅲ). Pharmacological toxicology has no direct effect on the secretion of gastric acid, and the chemical reactions of gastric acid rising or buffer in the gastric acid can cause an increase in the pH value in the gastric, which can relieve the symptoms of excessive gastric acid. Among them, the ability to harmonize is lower than that of magnesium containing agents and calcium carbonate, while higher than carbonate and sodium carbonate and carbonate. In addition, aluminum ions are discharged from the intestine with the insoluble aluminum phosphate from the intestine. A very small amount of pharmacokinetics is transformed into soluble aluminum chloride in the stomach and was absorbed and excreted from urine. Most aluminum ions are combined into the insoluble aluminum salt in the intestine, such as phosphate, carbonate And fatty acid salt, excreted from feces. The effect of this product is slow, and the length of time in the gastrointestinal effect is related to the speed of gastric emptying. The effect of fasting can last for 20 to 30 minutes, and the time limit for taking the medicine 1 to 2 hours after a meal may be extended to 3 hours. Indications can alleviate symptoms such as excessive gastric acid and merged. It is suitable for the treatment of gastric and duodenal ulcer, and the treatment of reflux esophagitis; Symptoms (hand and foot convulsions). Patients with uremia can reduce the absorption of phosphate and reduce acidmia. Aluminum hydroxide and acidic reaction: Al (OH) 3 3HCL == AlCl3 3H2O aluminum hydroxide and aluminum reaction: Al (OH) 3 NaOH == Naalo2 2H2O aluminum hydroxide In the alkaline environment, heterogeneous reaction: Al (OH) 3 == H3ALO3 (aluminum) aluminum hydroxide is heated and decomposed: 2AL (OH) 3 = Heating = Al2O3 3H2O

  3. Generally, aluminum pots such as aluminum pot will form alumina, which can prevent oxidation.
    The alumina powder is commonly used as a medium for color layer analysis.
    The alumina is also used as high temperature refractory materials, making fire tiles, crickets, porcelain, artificial gemstones, etc. Oxide is also a raw material for aluminum plans.

  4. Active aluminum oxide active aluminum oxide micro -powder combination agent

    R n
    The high -pure aluminum oxide high -pure oxide sodium lamp tube, fluorescent powder

    high temperature oxide aluminum low -temperature aluminum aluminum electronic ceramics, fine ceramics
    n Sodium high -temperature oxide structured ceramics

    low -sodium high -temperature aluminum oxide ultra -fine powder electronic ceramic, fine ceramic, refractory material

    Material

    This polishing and grinding aluminum stainless steel polishing

    Electrician aluminum aluminum high -voltage switch epoxy resin insulation components

    pure aluminum cement cement pure aluminum pure aluminum pure aluminum Calcium hyacxide cement refractory material binding agent

    aluminum alumina ceramic structure ceramic grinding medium

    fine ceramic mechanical parts

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top